| Key Features | High Performance 4-channel Power Amplifier for Subwoofer | |
| Class-D Amplifier Circuit | ||
| 1200W Max Output Power | ||
| 2Ω Load Capability | ||
| Full Function DSP (Digital EQ, Digital X'over) | ||
| Amplifier Features | Class D Amplifier | Yes |
| Full Range Digital Amplifier | Yes | |
| Load Capability | 2Ω Stable | |
| Maximum power output | 1200W | |
| Rated power output (4Ω) | 75W x 4 (4Ω) | |
| Rated power output | 100W x 4 (2Ω) | |
| Bridged power output (4Ω) | 200W x 2 | |
| CEA-2006 Compliant | Yes | |
| Low-pass Filter | Yes | |
| High-pass Fliter | Yes | |
| Infrasonic filter | Yes | |
| Phase inverter 0°(Normal) / 180°(Reverse) | Yes | |
| Built-in Full Function DSP | Yes | |
| Switched Mode Power supply | Yes, with Power MOS-FET | |
| Power Supply with Dual Transformer | Yes | |
| Cooling Fan | Yes | |
| Amplifier Information Display | Yes | |
| Power Indicator | Yes | |
| Installer Memory | Yes | |
| Last Settings Memory | Yes | |
| Line in | 2 RCA (Gold Plated) A/B | |
| Input Selector | A/AB | |
| Line out | 1 RCA (Gold Plated) | |
| Line Out Filter | Yes | |
| Single Side Terminals | Yes | |
| Full Contact Terminal | Yes | |
| Gold Plated Power & Speaker Terminals | Yes | |
| Die-Cast Aluminium Heat Sink | Yes | |
| Removable Coverplate | Yes |
| Amplifier-Specifications | Maximum power output (4Ω) | 1200W x 1 |
| Rated power output (4Ω, 14,4V) | 100W x 4 (20Hz ~ 200Hz, 0.05%THD) | |
| Rated power output (2Ω, 14,4V) | 150W x 4 (1000Hz, 0.5%THD) | |
| Rated power output (4Ω, 14,4V) | 300W x 2 (1000Hz, 0.5%THD) | |
| Rated power output (4Ω, 12V) | 75W x 4 (20Hz ~ 200kHz, 0.05%THD) | |
| Rated power output (2Ω, 12V) | 100W x 4 (1000Hz, 0.5%THD) | |
| Rated power output (CEA-2006) | 100Watts RMS x 4 at 4 ohms and 1% THD | |
| Low-pass Filter | 40~200Hz (24dB/oct) | |
| High-pass Fliter | 50~200Hz (12dB/oct) | |
| Infrasonic filter | 20/30/40/50/60Hz (-24dB/oct) B-channel | |
| RCA Input Sensitivity | 0.2 ~ 5V | |
| Input Impedance | 10kΩ | |
| Signal to Noise Ratio | 105dB | |
| Signal to noise ratio (CEA-2006) | 78dBa (Reference: 1 Watt into 4 Ohms) | |
| Frequency response (+0dB, -3dB) | 20Hz ~ 20000Hz | |
| Operating voltage | 14.4V (11V ～ 16V allowable) | |
| Maximum current consumption | 60A | |
| Dimensions (WxHxD) | 340 x 60 x 225(mm), | |
| Weight | 3.8kg |
| DSP Specifications | Frequency Band 1 | 25 / 40 / 60 / 80 / 100Hz |
| Frequency Band 2 | 150 / 200 / 300 / 400 / 500Hz | |
| Frequency Band 3 | 600 / 800 / 1k / 1.5k / 2kHz | |
| Frequency Band 4 | 3k / 4k / 5k / 6.3kHz | |
| Frequency Band 5 | 8k / 10k / 12.5k / 16kHz | |
| Quality Factor Band1 - Band3 | 1 / 2 / 3 / 5 | |
| Quality Factor Band4 - Band5 | 2 / 4 / 8 / 10 | |
| Gain (Boost or Cut) | -9dB - +9dB | |
| Delay Control | 0 - 3.9ms (0.1ms Step) |