| Key Features | Performance Standard Serie | |
| Stereo or mono setup | ||
| 500W Maximum output power | ||
| Built-in Low-pass filter | ||
| Signal Sensing Turn-on | ||
| Speaker level input | ||
| Power MOS-FET switching power supply | ||
| Die cast aluminium heat sink | ||
| Amplifier Features | Load Capability | 2Ω Stable |
| Maximum power output | 500W | |
| Rated power output (4Ω) | 70W x 2 (4Ω) | |
| Rated power output | 60W x 2 (4Ω) | |
| Bridged power output (4Ω) | 170W x 1 | |
| CEA-2006 Compliant | Yes | |
| Low-pass Filter | Yes | |
| Switched Mode Power supply | Yes, MOS-FET | |
| Signal Sensing Turn-on | Yes | |
| Line in | 2 RCA's | |
| Speaker level Input | Yes | |
| Single Side Terminals | Yes | |
| Die-Cast Aluminium Heat Sink | Yes |
| Amplifier-Specifications | Rated power output (4Ω, 14,4V) | 70W x 2 (20Hz ~ 20000Hz, 1%THD) |
| Rated power output (2Ω, 14,4V) | 85W x 2 (1000Hz, 1%THD) | |
| Rated power output (CEA-2006) | 70Watts RMS x 2 at 4 ohms and 1% THD | |
| Low-pass Filter | 80Hz (-18dB/oct) | |
| RCA Input Sensitivity | 0.2 ~ 5V | |
| Speaker Level Input Sensitivity | 4 ~ 12V | |
| Input Impedance | 10kΩ | |
| Signal to Noise Ratio | 100dB | |
| Signal to noise ratio (CEA-2006) | 80dBa (Reference: 1 Watt into 4 Ohms) | |
| Frequency response (+0dB, -3dB) | 20Hz ~ 50Hz | |
| Operating voltage | 14.4V (11V ～ 16V allowable) | |
| Maximum current consumption | 15A | |
| Dimensions (WxHxD) | 230 x 56 x 167(mm), | |
| Weight | 1.4kg |