| Key Features | 160W Maximum output power for deep and intense bass sound. | |
| ACTIVE EQ TECHNOLOGY with three types of bass to match the music of various genres. | ||
| 200 x 130mm Aluminum woofer cone with micro-step shape diaphragm surrounding. | ||
| High efficiency class-D amplifier for rich and clean bass sound. | ||
| Wired remote with Power indicator, Active EQ switch, Volume & Frequency contr. & phase switch. | ||
| Line-in & speaker level input with signal sensing turn-on. | ||
| Compact aluminum die-cast enclosure (280 x 70 x 220mm). | ||
| Connection cables and Installation brackets included. | ||
| Speaker Features | Speaker System | Active subwoofer system |
| Maximum Output Power | 160 W | |
| Speaker Size | 200 x 130mm | |
| Wired remote included | Yes | |
| Amplifier Included | Built-in | |
| Enclosure type | Aluminum die-cast | |
| Enclosure size (BxHxD) | 350 x 75 x 240 mm | |
| Enclosure net weight | 2.6 kg |
| Amplifier Features | Class D Amplifier | Yes |
| Maximum power output | 160W | |
| Low-pass Filter | Yes | |
| Phase inverter 0°(Normal) / 180°(Reverse) | Yes | |
| Built-in Equalizer | Yes | |
| Power Indicator | Yes | |
| Signal Sensing Turn-on | Yes | |
| Line in | RCA | |
| Speaker level Input | Yes | |
| Chassis | Aluminum Die-cast | |
| Yes | ||
| Wired Remote Support | Power indicator / Volume / Active EQ / Frequency / Phase | |
| Speaker/woofer Specifications | Woofer Cone material | Aluminum |
| Woofer cone dimensions | 200 x 130mm | |
| Speaker Surround | High-roll urethane | |
| Sensitivity | 89dB/W/m | |
| Frequency Response | 40Hz ~ 200Hz | |
| Speaker Impedance | 1Ω |
| Amplifier-Specifications | Maximum power output (4Ω) | 160W x 1 |
| Low-pass Filter | 50Hz ~125Hz (-18dB) | |
| Line-in Sensitivity | 20 mV | |
| Speaker Input Sensitivity | 400 mV | |
| Line-in Impedance | 22 kΩ | |
| Speaker Input Impedance | 10 kΩ | |
| Signal to Noise Ratio | 90dB | |
| Frequency response (+0dB, -3dB) | 35Hz ~ 150Hz | |
| Operating voltage | 14.4V (11V ～ 16V allowable) | |
| Maximum current consumption | 5.9A |
| Accessories | Bracket | Type1 x 1, type2 x1 |
| Remote control | Wired remote (5.0m) | |
| 10-pin connector cord (5.0m) | ||
| Speaker cord: (4.3m) | ||
| Double side adhesive tape for remote control | ||
| Screws (Parker-type) | Ø 5 x 12mm, 2 pieces | |
| Screws (Parker-type) | Ø 3 x 10mm, 2 pieces | |
| Screws (Parker-type) | Ø 5 x 16mm, 2 pieces | |