
Key Features | 400W Max Power Class-D Amplifier | |
Down Firing Ported Enclosure | ||
Compact design, Can be installed under the seat | ||
Woofer Cone with Reinforcing Ridges & Dual Area cap | ||
High Durability, Stress Controlled, Spider | ||
Optimized Magnetic Circuit | ||
Air Cooling System | ||
Side panel with Detachable Power Connector | ||
Wired remote (Level/Freq./phase control) |
Speaker Features | Speaker System | Active subwoofer system |
Peak Input Power | 400W | |
Speaker Size | 200mm | |
Oversized Dimension | Yes | |
Speaker Cone Design | P.P. cone with Reinforcing Ridges | |
Magnet Type | Ferrit | |
Wired remote included | Yes | |
Amplifier Included | Built-in | |
Enclosure type | Ported Enclosure | |
Enclosure size (BxHxD) | 450 x 300 x 150 mm | |
Enclosure net weight | 8.4 kg |
Amplifier Features | Class D Amplifier | Yes |
Maximum power output | 400W | |
Rated power output (4Ω) | 200W x 1 (4Ω) | |
Low-pass Filter | Yes | |
Bass Boost Circuit | Yes, 0 / -12 dB | |
Phase inverter 0°(Normal) / 180°(Reverse) | Yes | |
Power Indicator | Yes | |
Signal Sensing Turn-on | Yes | |
Line in | RCA | |
Speaker level Input | Yes | |
Chassis | Aluminum Die-cast | |
Yes | ||
DC cable Supplied | Yes |
Amplifier-Specifications | Maximum power output (4Ω) | 400W x 1 |
Low-pass Filter | 50~150 Hz (-18dB) | |
Bass Boost Circuit | 0~12dB/oct | |
RCA Input Sensitivity | 0.2 ~ 5V | |
Speaker Level Input Sensitivity | 4 ~ 12V | |
Input Impedance | 22kΩ | |
Frequency response (+0dB, -3dB) | 35Hz ~ 250Hz | |
Operating voltage | 14.4V (11V ~ 16V allowable) | |
Maximum current consumption | 25A |
Accessories | Bracket | L-shaped 2 pieces |
Remote control | wired remote | |
Remote control wire | Yes, 6m | |
DC cord | 500 cm | |
Screws (Parker-type) | Ø 5 x 25mm, 16 pieces | |
Screws (M-type) | M4 x 6mm, 4 pieces | |
Washer | Ø 6, 1 pieces | |
Speed nut | φ 6, 1 pieces |