
Key Features | 40 - 1 W RF Output Power (up to 40 W @ 50%, 25 W @ 100% Duty Cycle) | |
Light, Compact and Space-Efficient to fit 2 Repeaters in a 1 U Height, 19-inch Rack | ||
Large 1.71-inch OLED with Icons and Numeric Display | ||
Thermal-Controlled Cooling Fan | ||
Selectable Digital Protocol: DMR Tier II / NXDN Conventional (programmable one at a time) | ||
Non-repeat Simplex / Semi-Duplex Mode for Analog and NXDN Digital | ||
Multi-Site Conventional IP Network up to 16 Sites - for both Digital and Analog (Software option) | ||
Hot Standby System Redundancy | ||
SNMP Protocol for Direct Reporting to a Generic System | ||
IP Remote Control Interface (IPRCI) |
Supplied With | Cable | Yes |
D.C. Cable | Yes | |
Foot | Yes, 4 feet | |
Front Glass | Yes | |
Fuse | Yes | |
Hardware Fixture | Yes | |
Instruction Manual | Yes, In English, French, Spanish, Italian, German, Dutch, Turkish, Greek & Russsian | |
Screw Set | Yes |
Base Station & Repeater Features | 16 CTCSS/DCS Repeater Controller Built-In | Yes |
"Base Station" or "Repeater" Mode Operation | Yes | |
Flash ROM for Future Upgrades | Yes | |
Hang Timer | Yes | |
LED Display & Indicators | Yes | |
Programmable AUX I/Os | Yes | |
RF Power-down Detect | Yes | |
Windows Programming and Tuning Software | Yes |
DMR Features | AMBE+2 Vocoder | Yes |
Colour-code Repeater Control | Yes | |
IP-Console ID's | 10 | |
IP-Voice Logger ID's | Yes | |
Conventional IP Network | Yes | |
Mixed FM/Digital Operation - Conventional Mode | Yes | |
Repeater Control Built-in | Yes | |
TDMA 2-slot System Architecture | Yes |
NEXEDGE Base+Repeater Features | GIDs Per Site | 1000 in Conventional Mode |
User List (GID & UID) | 1000 (GID) & 1000 (UID) | |
Individual & Group Selcall - Conventional Mode | Yes | |
IP-Console ID's | 10 | |
Conventional IP Network | up to 16 Sites (needs optional IP License) | |
Mixed FM/Digital Operation - Conventional Mode | Yes | |
Multiple Encode/Decode Table | 16 RAN's | |
Radio Access Control (RAS) | Yes |
Applicable Standards | For use in the EU | Yes |
Measurement - EN Standards | Yes |
Technical Specifications | Frequency Range - E Type | 400-470 MHz |
Number of Channels | 32 | |
Channel Frequency Spread | 70 MHz | |
Channel Spacing - Analogue - Wide/Wide/Narrow | 25 kHz/20 kHz/12.5 kHz | |
Channel Spacing - Digital - Wide/Narrow | 12.5 kHz/6.25 kHz | |
Antenna Impedance - 50 Ohm | Yes | |
Current Drain | Standby: 0.7 A Transmitting: 12.0 A (Max. power), 9.0 A (25 W) | |
Frequency Stability | ± 0.5 ppm (-30 °C to + 60 °C) | |
Operating Temperature Range | -30 °C to + 60 °C | |
PLL Channel Steps | 6.25 kHz / 5 kHz / 3.125 kHz | |
Power Supply | 10.8 - 15.6 V DC | |
Dimensions | Projections not included: 208.5 x 44 x 211.5 mm Projections included: 214.5 x 44 x 242.9 mm | |
Weight (net) | 1.9 kg |
Receiver Specifications | Audio Output | External Speaker: 4 W with less than 5% distortion at 4 ohms |
Intermodulation | 72 dB | |
Selectivity (Analogue) | @ 25 kHz: 78 dB @ 20 kHz: 76 dB @ 12.5 kHz: 72 dB | |
Sensitivity | DMR (5% BER): -7 dBµV (0.22 µV) DMR (1% BER): -5 dBµV (0.28 µV) NXDN (3% BER) @ 12.5 kHz: -6 dBµV (0.25 µV) NXDN (3% BER) @ 6.25 kHz: -8 dBµV (0.20 µV) NXDN (1% BER) @ 12.5 kHz: -5 dBµV (0.28 µV) NXDN (1% BER) @ 6.25 kHz: -7 dBµV (0.22 µV) Analog (20 dB SINAD): -3 dBµV (0.35 µV) | |
Spurious Response Rejection | 85 dB |
Transmitter Specifications | RF Power Output | 40 - 1 W (40 W @ 50% Duty, 25 W @ 100% Duty) |
Audio Distortion | 1% | |
FM Hum & Noise | Analog: @ 25 kHz: 55 dB @ 20 kHz: 53 dB @ 12.5 kHz: 50 dB | |
Spurious Emission (EN) | -36 dBm ≤ 1 GHz -30 dBm > 1 GHz | |
Spurious Designator | 16K0F3E, 14K0F3E, 14K0F2D, 12K0F2D, 8K50F3E, 7K50F2D,7K60FXD, 7K60F7D, 7K60FXE, 7K60F7E, 7K60FXW, 7K60F7W, 8K30F1E, 8K30F1D, 8K30F7W, 4K00F1E, 4K00F1D, 4K00F7W, 4K00F2D | |
Digital Protocol (DMR) | ETSI TS 102 361-1, -2, -3 | |
Digital Protocol (NXDN) | ITU-R M2014.3 |
Software Options | DMR Conventional License | |
NXDN Conventional License | ||
Conventional IP Network License | ||
SIP Phone License for NXDN or DMR |