| Key Features | "One Radio" with Multi-protocol Support: designed to operate under an NXDN or DMR digital CAI, and FM analog protocols | |
| Upgradable Digital/Analog mode by software option (no firmware upgrade required) | ||
| Easy visible, white backlit LCD display: Alphanumeric, 10-digit, 13-character frame (aliases and icons) | ||
| 7-color LED indicator used to display various radio status | ||
| Renowned KENWOOD Audio Quality: 6 W (max. ) loud audio and optimizable TX/RX audio profile: Audio Equalizer, Auto Gain Control (TX/RX) and Microphone type settings | ||
| Max. 260 channels per radio, 128 zones per radio, and 250 channels per zone | ||
| Various scan functions: Dual/Single Priority scan, Multi/Single Zone scan and more | ||
| Orange-colored Emergency button & Customizable Emergency functions | ||
| D-sub, 15-pin connector on the rear panel | ||
| IP54 and MIL-STD 810C/D/E/F/G/H | ||
| Supplied With | D.C. Cable | Yes |
| Fuse | Yes, 10 A | |
| Instruction Manual | Yes, English, Spanish, German, French, Dutch, Italian, Turkish & Greek | |
| Mounting Bracket | Yes | |
| Screw Set | Yes |
| FleetSync Signalling Features | External-device Switching | Yes, External devices can be switched (via the AUX output) on receipt of a status ID code |
| Paging Call Function | Yes | |
| PTT ID Digital ANI | Yes | |
| Selective Calling | Yes | |
| Send GPS Data | Yes, - from an optional NMEA-0183 GPS | |
| Short/Long Text Messages | Yes | |
| Status Messaging | Yes, Status messages are pre-programmed 2-digit codes from 10 - 99 (numbers 80 - 99 are reserved for special messages). Up to 15 messages can be stored in stack memory. |
| MDC1200 Signalling Features | Emergency Encode/Decode | Yes |
| PTT ID Encode/Decode | Yes | |
| Radio check Decode | Yes | |
| Stun/Revive Decode | Yes |
| Options | Internal GPS Board | Yes - NMEA 0183 V2 compatible |
| "Molex" interface | Via KCT-60M Cable |
| Applicable Standards | RE Directive | EN300 086, 300 113, 300 219, 301 489 |
| EU Safety | EN60215, EN62368 | |
| Factory Quality Certification and Location | ISO 9001. Manufactured in Singapore | |
| For use in the EU | Yes | |
| IP54 | Yes | |
| MIL-STD 810 C/D/E/F/G/H | Yes |
| Technical Specifications | Frequency Range - E Type | 400-470 MHz |
| Number of Channels | 260 | |
| Number of Zones | 128 | |
| Channel Spacing - Analogue - Wide/Mid/Narrow | 25 kHz/20 kHz/12.5 kHz | |
| Antenna Impedance - 50 Ohm | Yes | |
| Current Drain | Standby: 0.45 A max. RX: 2.4 A max. TX: 10.0 A max. | |
| Frequency Stability | ± 0.5 ppm (-30 °C to + 60 °C) | |
| Operating Temperature Range | -30 °C to + 60 °C | |
| Operating Voltage | 13.2 V DC ± 15% | |
| Dimensions | 160 x 43 x 137.7 mm (Projections not included) | |
| Weight (net) | 1.21 kg |
| Receiver Specifications | Adjacent Channel Selectivity | Wide/Mid/Narrow - 75/73/65 dB |
| Audio Output | 6 W (max.) / 4 W (rated) at 4 Ohm | |
| Intermodulation | 65 dB | |
| Sensitivity - EIA 12 dB SINAD | 0.26 µV at 25 kHz 0.27 µV at 20 kHz 0.22 µV at 12.5 kHz | |
| Sensitivity - EN 20 dB SINAD | 0.32 µV at 25 kHz 0.33 µV at 20 kHz 0.33 µV at 12.5 kHz | |
| Spurious & Image Rejection | 75 dB |
| Transmitter Specifications | RF Power Output (High/Low) | 25 W / 5 W |
| FM Noise (EIA) | Wide/Mid/Narrow: 45/43/40 dB | |
| Modulation Distortion (Wide/Mid/Narrow) | 3% | |
| Modulation Limiting | ± 5.0 kHz at 25 kHz
± 4.0 kHz at 20 kHz ± 2.5 kHz at 12.5 kHz | |
| Spurious Emission (EN) | < 1 GHz ≤ -36 dBm 1 GHz - 4 GHz ≤ -30 dBm |