NEXEDGE VHF Digital Conventional/Analogue Repeater/Base Station (EU Use)

NXR-710E

NEXEDGE VHF Digital Conventional/Analogue Repeater/Base Station (EU Use)

    Key Features

    Key FeaturesNXDN Digital Air Interface
    AMBE+2 Vocoder for Natural Sounding Digital Voice
    Operates in NXDN Digital Conventional and FM Analogue Modes, even on the same channel
    Autosenses Received Mode (Digital or Analogue)
    30 Channel Scanning Base Station (Conventional Mode)
    Digital - Single-Site Trunking (future upgrade)
    Multi-Site IP Network Mode (via KTI-3 option)

    Supplied With

    Supplied WithCushionYes
    D.C. CableYes
    FuseYes, 15A
    HandleYes
    Instruction ManualYes, English, Spanish, French, Italian, German, Dutch, Turkish & Greek
    Screw SetYes

    Base Station & Repeater Features

    Base Station & Repeater Features16 CTCSS/DCS Repeater Controller Built-InYes
    19" Rack Mount DesignYes
    Audio DistortionLess Than 2.5%
    "Base Station" or "Repeater" Mode OperationYes
    Base Station FeaturesYes
    CW IDYes
    DTMF AUX Input MonitoringYes
    DTMF AUX Output ControlYes
    DTMF Front Panel PF-Key ControlYes
    EIA Voter Tone GenerationYes
    External FM Controller InterfaceYes
    External MPT Controller InterfaceYes
    Flash ROM for Future UpgradesYes
    Front Mounted SpeakerYes
    Full-Duplex OperationYes
    Hang TimerYes
    LED Display & IndicatorsYes
    Microphone Jack on Front PanelYes
    Program/Modem InterfaceYes
    Programmable AUX I/OsYes
    Programmable Function Keys6
    Remote Termination InterfaceYes
    Repeater FeaturesYes
    Time-Out TimerYes
    Volume Control on Front PanelYes
    Windows Programming and Tuning SoftwareYes

    NEXEDGE Features

    NEXEDGE FeaturesFM Analogue Conventional IncludedYes
    NXDN Conventional IncludedYes

    NEXEDGE Base+Repeater Features

    NEXEDGE Base+Repeater Features16 RAN Repeater Controller Built-In - Conventional ModeYes
    Conventional IP InterfaceYes, From V2.00 Firmware
    External Reference-Frequency ConnectionYes
    GIDs Per Site1000 in Conventional Mode
    Mixed FM/Digital Operation - Conventional ModeYes
    NXDN Scrambler built-InYes
    UIDs Per Site1000 in Conventional Mode

    Applicable Standards

    Applicable StandardsR&TTE: EN300 086, 300 113, 300 219, 301 489, 301 166Yes
    EU Safety: EN60065, 60950-1, 60215Yes
    Measurement - EIA StandardsYes
    Measurement - EN StandardsYes

    Technical Specifications

    Technical SpecificationsFrequency Range136 - 174 MHz
    Number of Channels30
    Channel Frequency Spread38 MHz
    Channel SpacingAnalogue : 25 kHz/20 kHz/12.5 kHz
    Channel Spacing - Digital - Wide/Narrow12.5 kHz/6.25 kHz
    Antenna Impedance - 50 OhmYes
    Antenna ConnectorRX: BNC
    TX: N
    Current DrainStand-By: 0.5 A
    Receive: 1.0 A
    Transmit: 11.0 A
    Duty Cycle100% at 25 Watts, 50% at maximum power
    Frequency Stability± 0.5 ppm (-30 °C to + 60 °C)
    Operating Temperature Range-30 °C to + 60 °C
    Operating Voltage13.6 V DC (10.8 ~ 15.6 V DC)
    PLL Channel Steps2.5 kHz/3.125 kHz
    Dimensions483 x 88 x 340 mm
    - Projections not included -
    Weight (net)9.7 kg

    Receiver Specifications

    Receiver SpecificationsAdjacent Channel SelectivityAnalogue:
    83 dB at 25 kHz
    81 dB at 20 kHz
    77 dB at 12.5 kHz
    Audio Output4 Watts with less than 5% distortion
    IntermodulationAnalogue: 72 dB
    SensitivityDigital:
    3% BER:
    0.28 µV at 12.5 kHz
    0.22 µV at 6.25 kHz.
    1% BER:
    -4 dB µV at 12.5 kHz
    -6 dB µV at 6.25 kHz.
    Sensitivity - EIA 12 dB SINAD0.28 µV
    Sensitivity - EN 20 dB SINAD-3dB µV
    Spurious Reponse Rejection (Analogue)85 dB

    Transmitter Specifications

    Transmitter SpecificationsRF Power Output5 W - 40 W
    FM Noise (EIA)55 dB at 25 kHz
    53 dB at 20 kHz
    50 dB at 12.5 kHz
    Modulation DistortionLess than 1%
    Modulation LimitingAnalogue:
    ± 5.0 kHz at 25 kHz
    ± 4.0 kHz at 20 kHz
    ± 2.5 kHz at 12.5 kHz
    Spurious Emission (EN)-36 dBm ≤ 1 GHz
    -30 dBm > 1 GHz