| Key Features | NXDN Air Interface | |
| AMBE+2 Vocoder for Natural Sounding Digital Voice | ||
| Operates in NXDN Digital Conventional and FM Analogue Modes, even on the same channel | ||
| Autosenses Received Mode (Digital or Analogue) | ||
| Digital Conventional and Digital Trunking Modes | ||
| Multi-Site Digital Trunking, up to 60000 GIDs and 60000 UIDs Per Network | ||
| Multi-Site IP Network Compatible | ||
| True 6.25 kHz Channel Spacing Operation | ||
| Includes Radio-to-Radio Mode (no repeater needed) | ||
| Requires Optional Microphone | ||
| Supplied With | D.C. Cable | Yes |
| Fuse | Yes | |
| Instruction Manual | Yes, English, Spanish, German, French, Dutch, Italian, Turkish & Greek | |
| Mounting Bracket | Yes | |
| Screw Set | Yes |
| NEXEDGE Features | Alphanumerical Aliases | Yes |
| Auto-Roaming/Registration (Multi-Site Trunking Mode) | Yes | |
| Broadcast Call (Trunking Mode) | Yes | |
| Call Queuing with Priority | Yes | |
| Channels GID | 260 | |
| Dual priority Scan | Yes | |
| Fail Soft Mode | Yes | |
| FM Analogue Conventional Included | Yes | |
| GIDs Per Network (Multi-Site Trunking Mode) | 60000 | |
| Group Call (Trunking Mode) | Yes | |
| Group Registration (Trunking Mode) | Yes | |
| Individual Private Call (Trunking Mode) | Yes | |
| Late Entry (Trunking Mode) | Yes | |
| Message Trunked Mode | Yes | |
| Multi-Site IP Network Compatible | Yes | |
| NXDN Conventional Included | Yes | |
| NXDN Digital 12.5/6.25kHz Channel Spacing | Yes | |
| Over-the-air Alias | Yes | |
| Over-the-air Programming | Yes, Requires OTAP Management Software | |
| Priority Monitor IDs | Yes, 4 IDs | |
| Radio Access Numbers (RAN) | Yes, 64, including "None" | |
| Remote Group Add (Trunking Mode) | Yes | |
| Remote Stun/Kill | Yes | |
| Selcall - Individual and Group (Digital Mode) | Yes | |
| Site Roaming (Digital Conventional Mode) | Yes | |
| Special Alert Tone Patterns | Yes | |
| Status Messaging | Yes | |
| Telephone Interconnect Function | Yes, Requires KTI-4 and a teleco unit | |
| Transmission Trunked Mode | Yes | |
| UIDs Per Network (Multi-Site Trunking Mode) | 60000 | |
| Wide Area All Group Call (Multi-Site Trunking Mode) | Yes | |
| Zones | 128 |
| FleetSync Signalling Features | Group Calling | Yes |
| Power On/Off Status Messages | Yes | |
| PTT ID Digital ANI | Yes | |
| Selective Calling | Yes | |
| Short Text Messages | Yes | |
| Status Messaging | Yes |
| MDC1200 Signalling Features | Emergency Encode/Decode | Yes |
| PTT ID Encode/Decode | Yes | |
| Radio check Decode | Yes | |
| Stun/Revive Decode | Yes |
| Options | MIL-SPEC speaker mic. with programmable controls | Yes |
| Applicable Standards | R&TTE: EN300 086, 300 113, 300 219, 301 489, 301 166 | Yes |
| R&TTE: EN300 440 | Yes | |
| EU Safety: EN60065, 60950-1, 60215 | Yes | |
| For use in the EU | Yes | |
| IP54 | Yes | |
| Measurement - EIA Standards | Yes | |
| Measurement - EN Standards | Yes | |
| MIL-STD 810 C/D/E/F/G | Yes |
| Technical Specifications | Frequency Range - E Type | 400-470 MHz |
| Number of Channels | 260 | |
| Talk Groups | Yes | |
| Channel Frequency Spread | 38 MHz | |
| Channel Spacing | Analogue : 25 kHz/20 kHz/12.5 kHz | |
| Channel Spacing - Digital - Wide/Narrow | 12.5 kHz/6.25 kHz | |
| Antenna Impedance - 50 Ohm | Yes | |
| Antenna Connector | BNC | |
| Frequency Stability | ± 1 ppm (-30 °C to + 60 °C) | |
| Operating Temperature Range | -30 °C to + 60 °C | |
| Operating Voltage | 13.2 V DC (10.8 ~ 15.6 V DC) | |
| Dimensions | 160 x 43 x 136 mm - Projections not included - | |
| Weight (net) | 1.2 kg |
| Receiver Specifications | Adjacent Channel Selectivity (Analogue) | 78 dB at 25 kHz 76 dB at 20 kHz 68 dB at 12.5 kHz |
| Audio Output | 4 Watt with less than 3% distortion | |
| Intermodulation | Analogue: 65 dB | |
| Sensitivity | Digital @ 3% BER: 0.28 µV at 12.5 kHz 0.20 µV at 6.25 kHz 1% BER: -2 dB µV at 12.5 kHz -5 dB µV at 6.25 kHz | |
| Sensitivity (Analogue) - EIA 12 dB SINAD | 0.25 µV | |
| Sensitivity (Analogue) - EN 20 dB SINAD | -3 dB µV | |
| Spurious Reponse Rejection (Analogue) | 80 dB |
| Transmitter Specifications | RF Power Output | 5 W - 25 W |
| FM Noise (EIA) | Analogue: 50 dB at 25 kHz 50 dB at 20 kHz 45 dB at 12.5 kHz | |
| Microphone Impedance | 1800 Ohm | |
| Modulation Distortion | Less than 3% | |
| Modulation Limiting | Analogue: ± 5.0 kHz at 25 kHz ± 4.0 kHz at 20 kHz ± 2.5 kHz at 12.5 kHz | |
| Spurious Emission (EN) | -36 dBm ≤ 1 GHz -30 dBm > 1 GHz | |
| Spurious Response (EIA) | 80 dB |