TK-7360E

Supplied With	D.C. Cable	Yes
	Fuse	Yes, 10 A
	Instruction Manual	Yes, English, Spanish, German, French, Dutch, Italian, Turkish & Greek
	Mounting Bracket	Yes
	Screw Set	Yes

PMR General Features	Blue colour LED	Yes
	3-colour LED (Red, Orange, Green)	Yes
	5-Tone Signalling formats	Yes
	Busy Channel Lock-out	Yes
	Calling Alert	Yes
	Compact Design	Yes
	Companded Audio	Yes
	DB-15 Accessory Connector	Yes; can also be programmed as 8 individual Accessory Ports
	DTMF Function	Yes
	Ease of Operating Use	Yes
	Easy Option Port (26-pin)	Yes
	Embedded Message	Yes
	Emergency Call Function	Yes
	Emergency Key	Yes
	Enhanced Kenwood Audio	Yes
	FleetSync	Yes
	Front-mounted Loudspeaker	Yes
	GPS Compatible	Yes
	Horn Alert/PA Function	Yes
	Independent Setting per Channel	Compander, Scrambler, Wide/Narrow Deviation & Hi/Lo Power
	Kenwood ESN (Electronic Serial Number)	Yes
	Key Lock	Yes
	Lone Worker Function	Yes
	MDC-1200	Yes
	Minimum-Volume Setting	Yes
	Monitor Button	Yes
	MPT Trunking (option)	Firmware Upgrade
	Multiple Scanning Function	Yes
	Operator Selectable Tone	Yes
	Programmable Function Keys	10 Programmable Function Keys
	PTT ID	Yes
	QT (CTCSS) / DQT (digital)	Yes
	Remote Stun and Revive	Yes
	RSSI Level Indicator	Yes
	SelCall Function	Yes
	Selectable Microphone Gain	Yes
	Switchable Display Backlighting	Yes
	Talk Around	Yes
	"Talk Back" Scanning Function	Yes
	Time-Out Timer	Yes
	Transceiver Password	Yes
	Voice Inversion Scrambler	Yes
	Voting Function	Yes
	Windows PC Programming and Tuning	Yes
	Wired Cloning Function	Yes

FleetSync Signalling Features	External-device Switching	Yes, External devices can be switched (via the AUX output) on receipt of a status ID code
	Paging Call Function	Yes
	PTT ID Digital ANI	Yes
	Selective Calling	Yes
	Short/Long Text Messages	Yes
	Status Messaging	Yes, Status messages are pre-programmed 2-digit codes from 10 - 99 (numbers 80 - 99 are reserved for special messages). Up to 15 messages can be stored in stack memory.

Applicable Standards	R&TTE: EN300 086, 300 113, 300 219, 301 489	Yes
	EU Safety: EN60065, 60950-1, 60215	Yes
	Factory Quality Certification and Location	ISO 9001. Manufactured in Singapore
	For use in the EU	Yes
	IP54	Yes
	MIL-STD 810 C/D/E/F/G	Yes

Technical Specifications	Frequency Range - E Type	136-174 MHz
	Number of Channels	128
	Number of Zones	128
	Channel Frequency Spread	38 MHz
	Channel Spacing - Analogue - Wide/Mid/Narrow	25 kHz/20 kHz/12.5 kHz
	Antenna Impedance - 50 Ohm	Yes
	Current Drain	Standby: 0.3 A Receive: 1.0 A Transmit: 8.0 A
	Frequency Stability	± 2.5 ppm (-30 °C to + 60 °C)
	Operating Temperature Range	-30 °C to + 60 °C
	Operating Voltage	13.2 V DC ± 15%
	PLL Channel Steps	5.0 kHz/6.25 kHz
	Dimensions	160 x 43 x 136 mm (Projections not included)
	Weight (net)	1.2 Kg

Receiver Specifications	Adjacent Channel Selectivity	Wide/Mid/Narrow - 70/70/60 dB
	Audio Output	4 W with less than 5% distortion
	Intermodulation	67 dB
	Sensitivity - EIA 12 dB SINAD	0.28 µV at 25 kHz 0.28 µV at 20 kHz 0.35 µV at 12.5 kHz
	Spurious & Image Rejection	70 dB

Transmitter Specifications	RF Power Output (High/Low)	25 W / 5 W
	FM Noise (EIA)	Wide/Mid/Narrow: 45/45/40 dB
	Microphone Impedance	600 Ohm
	Modulation Distortion (Wide/Mid/Narrow)	Less than 3%
	Modulation Limiting	± 5.0 kHz at 25 kHz ± 4.0 kHz at 20 kHz ± 2.5 kHz at 12.5 kHz
	Spurious Emission (EN)	-36 dBm ≤ 1 GHz -30 dBm > 1 GHz