TK-3170E6

PMR General Features	3-colour LED (Red, Orange, Green)	Yes
	5-Tone Signalling (multi-format)	Yes
	Battery Saver Mode	Yes
	Battery Status Indicator	Yes
	Busy Channel Lock-out	Yes
	Calling Alert	Yes
	Character Display (Alphanumeric)	Yes
	Compact Design	Yes
	Companded Audio	Yes
	Digital ANI Built-in	Yes
	DTMF Function	Yes
	Dual-mode Scanning	Yes
	Easy Option Port (20-pin)	Yes
	Emergency Call Function	Yes
	Emergency Key	Yes
	Enhanced Kenwood Audio	Yes
	Flash Upgradeable Firmware	Yes
	GPS Compatible	Yes
	Illuminated Keys	Yes
	Internal VOX Ready	Yes
	Kenwood ESN (Electronic Serial Number)	Yes
	Key Lock	Yes
	Lone Worker Function	Yes
	Minimum-Volume Setting	Yes
	Monitor Button	Yes
	Operator Selectable Tone	Yes
	Power-On Message	Yes
	Pre-programmed Status Messages	Yes, Status messages are 2-digit codes, from 10 - 99 (numbers 80 - 99 are reserved for special messages). Each message can be pre-programmed with up to 16 alphanumeric characters.
	Programmable Function Keys	7 Programmable Function Keys
	PTT ID	Yes
	QT (CTCSS) / DQT (digital)	Yes
	Remote Stun and Revive	Yes
	Scan	Yes
	SelCall Function	Yes
	Selectable Microphone Gain	Yes
	Short Text Messaging	Yes, Up to 48 characters per message.
	Long Text Messaging	Yes, Up to 1024 characters per message.
	Talk Around	Yes
	"Talk Back" Scanning Function	Yes
	Time-Out Timer	Yes
	Transceiver Password	Yes
	Voice Inversion Scrambler	Yes
	Voting Function	Yes
	Windows PC Programming and Tuning	Yes
	Wired Cloning Function	Yes

FleetSync Signalling Features	Emergency Status	Yes
	PTT ID Digital ANI	Yes
	Selective Calling	Yes
	Short/Long Text Messages	Yes
	Status Messaging	Yes

Options	Choice of Optional Battery Packs	Yes
	GPS Speaker/Mic Option	KMC-48GPS. From s/n B0A00001
	Internal Scrambler Board	Optional 3rd-party Module
	SmarTrunk II Omni Option	Yes

Technical Specifications	Frequency Range - E Type	400-430 MHz
	Number of Channels	128
	Channel Frequency Spread	30 MHz
	Channel Spacing	Wide: 25 kHz Narrow: 12.5 kHz
	Antenna Impedance - 50 Ohm	Yes
	Battery Life	With KNB-35L: 11 hours With KNB-25A: 8 hours With KNB-26N: 12 hours - 5-5-90 duty cycle with battery saver off -
	Battery Voltage	7.5 V DC ± 20%
	Frequency Stability	± 2.5 ppm (-30 °C to + 60 °C)
	Operating Temperature Range	-30 °C to + 60 °C
	PLL Channel Steps	5.0 kHz/6.25 kHz
	Dimensions	Radio only: 56 x 109 x 16.60 mm With KNB-35L: 56 x 109 x 31.70 mm With KNB-25A: 56 x 109 x 37.90 mm With KNB-26N: 56 x 109 x 37.90 mm - Projections not included -
	Weight (net)	Radio only: 205 g With KNB-35L: 300 g With KNB-25A: 415 g With KNB-26N: 455 g

Receiver Specifications	Adjacent Channel Selectivity	70 dB at 25 kHz 62 dB at 12.5 kHz
	Audio Output	500 mW with less than 5% distortion
	Circuitry - Double Conversion Superheterodyne	Yes
	Intermodulation	65 dB
	Sensitivity - EIA 12 dB SINAD	0.28 µV at 25 kHz 0.32 µV at 12.5 kHz
	Sensitivity - EN 20 dB SINAD	0.63 µV at 25 kHz 0.70 µV at 12.5 kHz
	Spurious Reponse Rejection (Analogue)	70 dB

Transmitter Specifications	RF Power Output (High/Low)	4 W / 1 W
	FM Noise (EIA)	45 dB at 25 kHz 40 dB at 12.5 kHz
	Microphone Impedance	2000 Ohm
	Modulation Distortion	Less than 5%
	Modulation Limiting	± 5.0 kHz at 25 kHz ± 2.5 kHz at 12.5 kHz
	Spurious Emission (EN)	-36 dBm ≤ 1 GHz -30 dBm > 1 GHz